Effect of Octenyl Succinic Anhydride (OSA) Modified Starches on the Rheological Properties of Dough and Characteristic of the Gluten-Free Bread

The study focused on the influence of starch modified by octenyl succinic anhydride (OSA) on the rheological and thermal properties of gluten-free dough containing corn and potato starch with the addition of pectin and guar gum as structure-forming substances. The starch blend used in the original dough recipe was partially (5% to 15%) replaced with OSA starch. The rheological properties of dough samples were determined, and the properties of the resulting bread were analyzed. It was found that the dough samples behaved as weak gels, and the values of storage and loss moduli (G′ and G″, respectively) significantly depended on angular frequency. Various shares of OSA starch in recipes modified dough in different ways, causing changes in its rheological characteristics. The introduction of OSA starch preparations resulted in changes in the bread volume and physical characteristics of the crumb. All the applied preparations caused an increase in bread porosity and the number of pores larger than 5 mm, and there was a parallel decrease in pore density. The presence of OSA starch preparations modified bread texture depending on the amount and type of the applied preparation. The introduction of OSA starches in gluten-free bread formulation caused a significant drop in the enthalpy of retrograded amylopectin decomposition, indicating a beneficial influence of such type of additive on staling retardation in gluten-free bread.     

Probiotic Yoghurts with Sea Buckthorn,Elderberry, and Sloe Fruit Purees

Elderberries, sea buckthorn, and sloe berries are fruits of wild-grown bushes, valued in folk medicine for their health-promoting properties but still rarely applied in food. The aim of the present study was to produce probiotic yoghurts with a 10% addition of sweetened purees prepared from elderberries (EPY), sea buckthorn (SBPY), and sloe berries (SPY) and to assess their chemical composition, acidity, content of polyphenols and anthocyanins, ferric reducing antioxidant power (FRAP) and antiradical power (ARP), level of starter microbiota, concentration of acetaldehyde and diacetyl, syneresis, instrumentally measured color and texture parameters, and sensory acceptance. The results were compared to those obtained for plain probiotic yoghurt (PPY) and the changes tracked during 1 month of cold storage at 2 week intervals. The addition of elderberry and sloe berries significantly increased the antioxidant capacity of probiotic yoghurts, probably due to a high content of polyphenols, especially anthocyanins. However, anthocyanins were more stable in the EPY when compared to the SPY. All yoghurt treatments were characterized by good sensory quality and viability of starter microorganisms, including probiotic strains during cold storage. Elderberries promoted the evolution of diacetyl in yoghurts during storage and, together with sloe berries, produced increased syneresis and the greatest changes in color profile compared to PPY.     

Construction of Multivariate Tight Framelet Packets Associated with Dilation Matrix

In this paper, we present a method for constructing multivariate tight framelet packets associated with an arbitrary dilation matrix using unitary extension principles.We also prove how to construct various tight frames for L2(Rd) by replac-ing some mother framelets.     

Optical asymmetric watermarking using modified wavelet fusion and diffractive imaging

In most of the existing image encryption algorithms the generated keys are in the form of a noise like distribution with a uniform distributed histogram. However, the noise like distribution is an apparent sign indicating the presence of the keys. If the keys are to be transferred through some communication channels, then this may lead to a security problem. This is because; the noise like features may easily catch people׳s attention and bring more attacks. To address this problem it is required to transfer the keys to some other meaningful images to disguise the attackers. The watermarking schemes are complementary to image encryption schemes. In most of the iterative encryption schemes, support constraints play an important role of the keys in order to decrypt the meaningful data. In this article, we have transferred the support constraints which are generated by axial translation of CCD camera using amplitude-, and phase- truncation approach, into different meaningful images. This has been done by developing modified fusion technique in wavelet transform domain. The second issue is, in case, the meaningful images are caught by the attacker then how to solve the copyright protection. To resolve this issue, watermark detection plays a crucial role. For this purpose, it is necessary to recover the original image using the retrieved watermarks/support constraints. To address this issue, four asymmetric keys have been generated corresponding to each watermarked image to retrieve the watermarks. For decryption, an iterative phase retrieval algorithm is applied to extract the plain-texts from corresponding retrieved watermarks.     

Signal enhancement of a novel multi-address coding lidar backscatters based on a combined technique of demodulation and wavelet de-noising

Multi-address coding (MAC) lidar is a novel lidar system recently developed by our laboratory. By applying a new combined technique of multi-address encoding, multiplexing and decoding, range resolution is effectively improved. In data processing, a signal enhancement method involving laser signal demodulation and wavelet de-noising in the downlink is proposed to improve the signal to noise ratio (SNR) of raw signal and the capability of remote application. In this paper, the working mechanism of MAC lidar is introduced and the implementation of encoding and decoding is also illustrated. We focus on the signal enhancement method and provide the mathematical model and analysis of an algorithm on the basis of the combined method of demodulation and wavelet de-noising. The experimental results and analysis demonstrate that the signal enhancement approach improves the SNR of raw data. Overall, compared with conventional lidar system, MAC lidar achieves a higher resolution and better de-noising performance in long-range detection.     

基于Gabor小波变换的ICA火灾图像纹理识别算法

针对火灾图像纹理识别问题,提出了基于Gabor小波变换的ICA火灾图像纹理识别算法,并根据火灾图像纹理识别特点进行了优化。首先用不同尺度和方向的Gabor滤波器对待识别图像滤波,得到其特征图像,然后将特征图像转化成特征向量作为ICA的输入,得到基矢量子空间,再将测试图像经过Gabor滤波器的特征向量投影到ICA子空间中得到系数向量作为目标识别特征,最后用支持向量机进行识别。通过与Gabor滤波器法和ICA方法的对比实验,表明该算法可以在火灾纹理图像的识别率上比传统方法提高5%以上,为火灾图像识别提供了一种新思路。     

Nanotextured multicrystalline Al‐BSF solar cells reaching 18% conversion efficiency using industrially viable solar cell processes

We report recent achievements in adapting industrially used solar cell processes on nanotextured surfaces. Nanostructures were etched into c‐Si surfaces by dry exothermic plasma‐less reaction of F species with Si in atmospheric pressure conditions and then modified using a short post‐etching process. Nanotextured multicrystalline wafers are used to prepare Al‐BSF solar cells using industrially feasible solar cell proc‐ essing steps. In comparison to the reference acidic textured solar cells, the nanostructured cells showed gain in short circuit current (J_sc) of up to 0.8 mA/cm² and absolute gain in conversion efficiency of up to 0.3%. The best nanotextured solar cell was independently certified to reach the conversion efficiency of 18.0%. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Geometry dependence of the viscosity of a thermotropic LC-polymer measured by slit dies

This paper reports on geometry dependent viscosity curves of the biaxial thermotropic LC-Polymer Vectra B 950 measured with rectangular slit dies. The geometry dependence of the flow behaviour originates from the flow of two layers. The layer near the wall is highly flow oriented and free from defects. The layer in the bulk has an ordered texture. The thickness of the wall layer decreases with wall shear stress. Based on the Frank theory and the assumption that the core of a moving disclination is the smallest radius of distortion, the wall layer thickness is predicted and compared with experimental data.     

Residual stress analysis near a cold expanded hole in a textured alclad sheet using X-ray diffraction

In this paper we present the methods of determination and the stress obtained at the periphery of a cold expanded hole in a 2024-T3 Alclad aluminum alloy sheet. The measurements in the aluminum clad were performed by the sin²Ψ method, taking experimental precautions to deal with the texture effects. In the core aluminum a special method had to be implemented to determine the stress values in a direction not accessible to the X-ray diffraction. The strains were measured in sample orientations selected according to the texture characteristics and stress factorsF _ij were used to calculate the stress tensor. TheF _ij values were determined assuming a quasi-isotropic material behavior, after concluding that the stress results were not significantly affected by factors calculated for textured material. The residual stress profile, both in the clad and in the sheet, shows a nearly axisymmetric stress state. Compressive stresses were observed near the periphery of the hole, with values that are higher on the exit than on the entrance face. Residual stresses were also higher in the hoop direction than in the radial direction. They decreased with the radial distance to the hole and affected the previous stress state over a distance of 6 mm. The plastic deformation induced by the cold expansion is well evidenced by the FWHM values, which in the affected zone decrease with increasing distance from the hole edge.     

Transition theories of elastic-plastic deformation of metallic polycrystals

Summary A general approach to the problem of determination of elastoplastic behavior of metallic polycrystals at finite deformation is presented. The relation between moving dislocation density and global slip rate for grains is developed. Transition to grain response is obtained by introducing the hardening matrix. Field equations for heterogeneous elastoplastic metals are transformed into an integral equation, using Green functions technique. This allows to find the spin of the lattice related to texture formation.Scale transition is achieved by a self-consistent approximation of the integral equation. New results concerning BCC metals (sheet steel) are presented. They apply to tensile test, Lankford coefficient, initial and subsequent yield surfaces, and evolution of the internal state of the polycrystal: second-order residual stress, stored energy and texture evolution.